Audio Recording for Video: Get Clear Sound on Location
A sharp picture cannot rescue dialogue that viewers struggle to understand. Whether you are filming a business interview, a creator tutorial or a short scene, good audio recording for video starts with the location, microphone placement and a reliable recording routine. You do not need to buy every piece of sound equipment. You need to capture a clear voice without avoidable noise, distortion or missing takes.
1. Listen to the location before setting up the camera
A room can look perfect and sound terrible. Bare walls create reflections, refrigerators add a low hum, and a quiet street can become noisy when a nearby business opens. Visit at roughly the time you intend to film, if possible.
Stand where the speaker will be and listen silently for a minute. Then record a short test with someone speaking at their normal volume. Play it back through headphones rather than judging the space with your ears alone.
- Check continuous noise: air conditioning, ventilation, traffic, machinery and electrical appliances.
- Check intermittent noise: lifts, doors, deliveries, aircraft and conversations outside.
- Check reflections: clap once and listen for a lingering ring or fluttering echo.
- Check what you can control: close windows, move away from roads or choose a furnished room.
Soft furnishings, rugs and safely positioned sound blankets can reduce reflections. Thin acoustic foam will not stop traffic coming through a window. If you switch off cooling equipment with permission, plan short recording blocks and restore it afterwards.
Location sound belongs in the preparation for film production, not on a list of problems to solve after filming.
2. Choose the microphone for the shot
The most expensive microphone is not automatically the best choice. Distance from the speaker, the room and the camera framing matter more than a product label.
Lavalier microphones for mobile or wide shots
A lavalier clips near the speaker’s mouth, making it useful for presenters, interviews and shots where a boom cannot get close. Start around the upper chest, following the microphone manufacturer’s placement guidance, and test the actual outfit.
Necklaces, loose fabric and hair can rub against the capsule. If you hide the microphone, use suitable mounting accessories and ask permission before attaching anything to clothing. Have the speaker turn, gesture and sit down during the test.
Boom microphones for dialogue
A microphone on a boom can capture natural dialogue without being attached to the performer. Keep it just outside the frame, aimed towards the mouth, and maintain a consistent distance. Check for shadows and reflections as well as whether the microphone enters the picture.
Shotgun microphones can work well in suitable settings, especially outdoors, but they do not magically isolate distant voices. In reflective interiors, a suitable indoor dialogue microphone may be a better choice.
Camera-mounted microphones for supporting sound
A camera-mounted microphone is useful for reference audio, atmosphere and close working distances. It is usually a poor primary choice when the speaker stands several metres away. If your test sounds distant, move the microphone closer rather than simply increasing its level.
3. Set up a clean recording chain
Before adjusting levels, confirm that every connection is secure and that the recorder is receiving the intended microphone. Check batteries, available storage and whether your microphone needs power from the recorder.
For most video workflows, record at 48 kHz. Where available, 24-bit recording provides useful headroom for conventional recording setups. Confirm the required format with your editor if the project has specific delivery requirements.
- Monitor through headphones. Listen for crackles, hum, clothing noise and wireless dropouts.
- Ask for a realistic performance. A quiet sound check is not enough if the actual delivery includes laughter or raised voices.
- Set conservative levels. For conventional digital recording, dialogue peaks around -12 to -6 dBFS can be a useful starting point, with space for louder moments.
- Test the full signal path. Wireless transmitters, receivers, recorders and camera inputs can each introduce problems.
- Record and play back a sample. Confirm that the file exists and contains the expected sound.
Do not let peaks reach 0 dBFS in a conventional recording workflow. Clipping can create harsh distortion that is difficult or impossible to repair convincingly. A 32-bit float recorder can reduce some level-setting risks, but it cannot prevent microphone overload, clothing rustle or problems earlier in the signal chain.
Outdoors, use wind protection suited to the conditions. A small foam cover may not be enough in moving air; stronger wind often calls for a proper windshield system.
4. Follow a repeatable routine on every take
Good equipment will not help if nobody notices that recording has stopped. Assign one person to monitor sound whenever possible. On a small solo shoot, make audio checks part of the same routine as focus and exposure.
- Before the take: confirm battery life, recording status, microphone position and a clear signal.
- At the start: identify the scene or interview section, then leave a short pause before speech.
- During the take: listen for interference, rubbing, changing voice levels and background interruptions.
- At the end: leave another pause and note any lines that need repeating.
If sound is recorded separately, capture a visible hand clap or slate while both camera and recorder are running. This gives the editor a synchronisation reference. Camera reference audio is also helpful; timecode can streamline larger setups when configured correctly.
Record around 30–60 seconds of room tone in each setup: everyone stays quiet while the microphones capture the background. Keep equipment settings and room conditions unchanged. This helps smooth dialogue edits, but it cannot repair speech buried beneath noise.
For example, if a motorcycle passes during an important answer, wait for it to leave and ask for the sentence again. That small interruption is usually easier than trying to remove the motorcycle later.
5. Give your editor usable files, not repair work
Before leaving, play back a sample from each microphone and any important takes. Copy the recordings to two separate storage locations as soon as practical, and verify the copies before formatting cards.
Keep original filenames intact until your team has an agreed naming process. Organise folders by shoot date and recording device, and include a short note identifying speakers, preferred takes and known sound issues.
A useful handover might say: Interview B, take 3: preferred answer; lavalier has jacket noise near the end; boom track is clean. If you recorded multiple microphones, supply the separate tracks rather than only a combined mix.
During video editing, dialogue can be balanced, distracting frequencies reduced and transitions smoothed. However, aggressive noise reduction can make voices sound metallic or watery. Clear source recordings leave more room for natural-sounding results.
Frequently asked questions
Can I record good video audio with a smartphone?
Yes, particularly when a compatible external microphone is placed close to the speaker. Check compatibility, monitor where possible and test the saved recording. If the phone records separately from the camera, capture a sync clap.
Should I use a lavalier or a boom microphone?
Choose according to framing, movement and the environment. A lavalier suits mobile presenters and wider shots; a boom works well when it can stay close and out of frame. Recording both can provide alternatives, but each still needs monitoring.
Can background noise be removed completely in editing?
Sometimes steady noise can be reduced substantially, but complete removal is not guaranteed. Noise overlapping speech is especially difficult. Move locations, stop the source or repeat the line whenever possible.
Make sound part of your next shoot plan
Start with a quiet location, place the microphone close, monitor every take and check your files before packing up. If you need help planning production or preparing footage for an edit, contact Filtershots to discuss your project.


